Cleaning Steps For Petri Dishes

Generally, it goes through four steps of soaking, brushing, pickling, and cleaning.

1. Soaking: New or used glassware should first be soaked in water to soften and dissolve the attachments. Before using new glassware, simply brush it with tap water, and then soak it in 5% hydrochloric acid overnight; used glassware often has a lot of protein and oil attached, and it is not easy to wash off after drying, so it should be immersed in clean water immediately after use for brushing. .

2. Brushing: Put the soaked glassware in the detergent water and brush repeatedly with a soft brush. Do not leave dead corners and prevent damage to the surface finish of the utensils. Wash and dry the cleaned glassware for pickling.

3. Pickling: Pickling is soaking the above-mentioned utensils in a cleaning solution, also known as acid solution, to remove possible residual substances on the surface of the utensils through the strong oxidation of the acid solution. Pickling should not be less than six hours, usually overnight or longer. Be careful when handling utensils.

4. Rinsing: The utensils after brushing and pickling must be fully rinsed with water. Whether the utensils are cleaned after pickling directly affects the success or failure of cell culture. When washing the pickled utensils by hand, each utensil should be "filled with water-empty" repeatedly for at least 15 times, and finally washed with re-distilled water for 2-3 times, dried or dried and then packaged for later use.